Kreg KMS7215 Micro-Adjuster for Band Saw and Router Table Fences

Cheap Kreg KMS7215 Micro-Adjuster for Band Saw and Router Table Fences Review

I bought my router table Kreg precision, and I love it! It took 1 minute to install and 30 seconds to learn and it works very well with a router table fence Kreg's. No more tapping and exceeded the mark, just unlock the gate, turn the screw and close again. It will engage / disengage a tour of the screw, and fits easily into the track so it is not in the way when sliding the back fence to change bits either.

There are a few comments on thisdevice does not work correctly with Kreg band saw fence, but if this is the same design as the router fence, there must be a problem with the installation or how it is used. I do not comment on the adjustment of the fence with tension on it, it is not necessary to have the voltage on the fence like when you tap the way it Old School (in fact, typing this type of closure when it is locked will eventually hurt him or at least align Knock out of whack), and mine works finewith the closure fully unlocked. The beauty of the Kreg fence is that it will always be parallell with the rail once it is locked, so the adjustment can be done without any tension on the fence. Loosen the lockdowns completely turn the screw, locking the fence again and it will be perfectly aligned. You may want to turn the screw just before unlocking the gate to compensate for adoption in the screws, but that's all.

Taking It Off when you remove the fenceit's really not much either, turn the screw all the way and drag it Out. It may be boring to those who long to remove and reinstall the fence several times a day, but this is not a problem on a router table where the fence stays on almost all the time.

Kreg KMS7215 Micro-Adjuster for Band Saw and Router Table Fences Feature

• Time-saving and accurate saw fence micro-adjuster
• Allows you to dial-in precise adjustments easily with one hand
• Easy-to-grip ribbed dial
• Black plastic fixing knob
• Manufacturer's limited 30-day warranty

Kreg KMS7215 Micro-Adjuster for Band Saw and Router Table Fences Specifications

The Kreg Micro-Adjuster for Band Saw Fences allows you to dial-in precise adjustments easily with one hand. It features a ribbed dial, which is easy to grip with just one hand or thumb, and a black plastic fixing knob to easily lock the adjustment. The micro-adjuster is backed by a manufacturer's limited 30-day warranty.

Kreg KMS7215 Micro-Adjuster for Band Saw and Router Table Fences Overview

Dial-in precise adjustments to your KREG Band Saw Fence with the Precision Micro-Adjuster.



*** Product Information and Prices Stored: Mar 21, 2010 00:34:19